Tools/Maintenance

Finish Line® Speed Degreaser™ is the fastest way to clean a bicycle drivetrain. Dry-degreasing technology requires no water rinsing as it evaporates rapidly after application to leave no residue. It's innovative turbo sprayer uses mechanical agitation to blast away contaminants from metal components. Speed™ is formulated with advanced solvents to quickly breakdown grease, grime, dust, and dirt. For most applications Speed™ requires no additional brushes or tools. Speed™ leaves no residue so lubricants can be applied to the chain immediately after application. • Dry-degreasing technology requires no water rinsing • Innovative turbo-sprayer blasts away contaminants • Advanced solvents breakdown grease and grime • Dries rapidly to leave no residue • Leaves bicycle chains clean and ready for fresh lubrication

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

- Incredibly effective cleaning formula containing Nano Technology that also cares for your bike's delicate finishes - Contains no harmful acids, CFC's or solvents and is fully biodegradable - Cuts through dirt, oil and grime quickly and safely leaving your whole bike sparkling clean

Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

The strong, lightweight IB-2 features ten essential tools in the compact form factor of our unique I-Beam handle. Perfect for on-the-ride adjustment of brakes, handlebars, saddles, or derailleurs. With its compact size, the IB-2 is a perfect tool for the saddlebag, jersey pocket, or toolbox.

- Unique citrus-based solvent/surfactant blend quickly dissolves away grease and grime. - Low surface tension allows superior penetration for complete degreasing. - Biodegradable, water-soluble formula easily rinses away. Oranj Peelz has quickly and effectively degreased drivetrains for more than twenty years using a unique citrus-based solvent/surfactant blend. Designed specifically for bicycle drivetrain degreasing, the powerful, biodegradable formula penetrates into every surface and quickly loosens and dissolves even the toughest drivetrain grime. The water soluble formula rinses easily leaving surfaces residue-free.

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

- Made from laser cut tool steel heat-treated for strength and lasting performance - New design features 24mm socket driver for use with Pedro's professional socket tools - 290mm length and ergonomic shape provide excellent leverage and comfort - Smaller lightweight design perfect for travel and the toolbox Pulling inspiration from our shop wrenches and using the same laser-cut tool steel construction, the Pro Travel Pedal Wrench makes quick work of tough pedals and now doubles as a socket driver for use with Pedro's professional socket tools. Features include a long 290mm length, cushioned plastic grip for control and comfort, heat-treated tool steel construction for strength and lasting performance, new 24mm socket driver, and a precision-cut 15mm wrench opening positioned at a 30 degree offset to improve mechanical advantage and wrench positioning. The smaller, lightweight, 215g design is perfect for travel and easy to fit in the toolbox.

While most other manufacturers cast or forge their bottom bracket tools, we machine ours for greater precision. Whenever you're dealing with anodized surfaces, great care needs to be taken to keep those surfaces from getting marred, gouged, and stripped out. That can be nearly impossible with some spanner style tools, and difficult with other loose-fitting sockets. The most unique feature about this tool is the inner nub; that nub in the center of the tool is the same size as the crank spindle. What this does is give you a second point of contact that keeps the tool from coming off of the part when trying to remove stubborn cups. This dual sided socket is designed to work with the new Shimano DA-9000/XTR-BB93 bottom bracket as well 6800 Ultegra and 5800 105 11spd groups (BBR-60).

If your bike has a hollow bottom bracket, the Pro Bottom Bracket stand makes it easy and convenient to do maintenance work. This stands folds up for easy storage when not in use. - Compatible with Hollowtech 2 bottom brackets - Coated alloy - Anti-slip base

Designed and built especially for singlespeed bikes, Park's SS-15 Single Speed Spanner is a durable forged-steel tool with a 15mm socket wrench for axle nuts, 15mm open-end wrench for pedals, a tire lever, and a bottle opener. It's just the right size to take along on rides and is great for wrenching in your shop too.

- 5 DART plugs for use with the Stan's NoTubes DART tool

The majority of bicycle maintenance is delicate, precision work. But occasionally, getting the job done requires maximum leverage and control. The 8 and 10mm L-Handle Allen Wrench Tools are designed to create optimal torque for pedals and cranks. With an extra deep contact arm, long lever arm and ergonomic handle, having great control during high-torque moments is reassuring. These Allen wrenches also have a convenient ball end for quick turns of a bolt.

Ever wonder why so many Tour de France and professional mechanics rely on dropout-style wash and work stands? It’s because they can adapt to virtually any bike quickly and easily, offer a rotating platform, and have great stability for precision work – at least that’s the case with the award-winning Sprint Repair Stand. The compact and portable design accommodates almost any frame and it’s stable platform and durable construction is ready to take your bike maintenance to the next level.

A cream to help assist the break-in process and keep leather supple, specially formulated from natural ingredients to condition, preserve and shower-proof your saddle. Proofide is the only substance that should be used to care for your Brooks Leather Saddle, specially formulated from natural ingredients to condition, preserve and showerproof. Apply a little of this leather saddle cream to the finished side of the leather. Allow to permeate until dry and then polish off. Also apply Proofide to the underside of the saddle, but leave this coating on to protect against dirt and moisture. It should be used several times during the ‘breaking-in’ period and periodically (3-6 months) thereafter. It is recommended to polish the saddle with a soft cloth before first use.

Bike Protect is the ultimate liquid bicycle protection. Preserve and freshen your bike with Bike Protect's incredible water dispersing action! It's a perfect 'all over', after-wash corrosion inhibitor due to its extremely high oil content. This increased oil content creates the finest bike protection spray on the market. It drives out moisture and leaves a sparkling, non-sticky protective layer on your frame, drive chain, metal parts, and paintwork. It's ideal to spray onto your chain to drive out moisture before you apply any of the brilliant Muc-Off chain lubes. Bike Protect doesn't just disperse water after you've given your bike a good clean. It also prevents dirt adhesion between washes and reduces future maintenance time as well as helping reduce friction, wear, and energy consumption. - High performance formula leaves dry, non-sticky, protective film - Safe on frame, metal parts, plastics, rubber, paint, and carbon fiber - Drives out excess moisture - Prevents dirt adhesion - Light lubricant coats moving parts - Quick and easy to use - Aerosol Spray - Ideal for Road Cycling, Cyclocross, MTB, & Fat Bikes - Provides the ultimate performance in freezing conditions - For chains, cables, shifters, derailleurs, pedals, & cleats - Incredible durability - Pipette system for easy application

High performance suspension fluid formulated to provide fade-free performance. Proprietary additive eliminates stiction, friction and wear, and protects against foaming, seal-swell, oxidation and corrosion.

- Slotted construction for securing Aerolite bladed spokes - Helps prevent spoke twisting while wheel building/truing - Red handle for 0.8-1.0mm spokes - Black handle for 1.0-1.3mm spokes

Representing the next evolution of our flagship repair stand, the new Pro Mechanic builds on the longstanding reputation of its predecessor, the Pro Elite. With upgraded clamp jaws, clutch components, and mast hardware, the Pro Mechanic is more durable, more stable, easier to use, and even more reliable. The updated front spinner knob on our patented Speed Ratchet clamp head makes operation even faster, and the revised rotating clutch internals hold bikes more securely. This is the premier bike repair stand for mechanics who value class-leading lightweight, compact folded size, and rugged durability combined with unmatched stability, adjustability, and portability. Features: - Patented, ratcheting action seatpost clamp features a spinner knob for fast, one-handed operation and a push-button release. - Updated with more holding force, the 360-degree rotating clamp design provides easy access to any part of your bicycle. - Frame clamp positions from 42"-67" (107-170cm) in height. - Secure clamp with micro-adjustment secures and protects expensive components and beautifully painted frames. - New, rubber clamp jaw covers are tool-free and replaceable. - Clamp opening up to 2.6" (6.6cm) accommodates the largest diameter frame tubes. - Anodized 6061 T6 aluminum construction is ultralight, corrosion resistant, and incredibly durable. - Sturdy metal fittings and quick releases for a lifetime of duty in the field or at home. - Stiff tripod base and rubber-coated end caps create ultimate stability even on uneven surfaces. - Working load range of 10-35lbs (4.5-16kg) accommodates service on road, cyclocross, and XC mountain bikes. Maximum capacity 75lbs (34kg). - Portable and compact construction creates a remarkably small folded footprint of 5" x 8" x 45" (13 x 20 x 115cm). - Available travel bag is water-resistant, durable, and padded to protect your stand and your other equipment. - Quick-release fittings make setup and storage fast and convenient. - At 12.6 lbs (5.7kg), traveling with this repair stand is easy. - A full ensemble of repair parts is available for long-term serviceability. - 3-Year Warranty.

- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal-to-metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency

- Essential mechanic tools to properly service and maintain all RockShox products - Clamps the shock body for easy maintenance

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or MATTONE. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Nove (No-vay) 9 forged and plated tools: Hex 2/3/4/5/6/8 +Torx 25 +PH2/Flat - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - NOVE- 79 grams

- Alloy body with chrome plated tools - Hex 2 / 2.5 / 3 / 4 / 5 / 6 / 8mm - PH2 screwdriver - Torx 10 / 26 - Chaintool - Spoke wrench 3.6 / 3.75 / 4.0 / 4.4mm - Chain holder - Tire lever - Brake pad spreader

The MTC-25 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible driver - Combo cross/straight tip screwdriver - Key ring holder - Weight: 94g (3.32 ounces)

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime

Hydraulic line cutting tools provide precise, repeatable cuts in a convenient handheld package. - Compatible with Jagwire Pro and Sport level hydraulic hose cutters

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Trigger spray included for easy application on cassettes, chainrings and derailleurs - Safe for metal, plastic, rubber and seals

Bottom brackets have some of the highest torque specs of any component found on a bicycle. Despite this, some bottom bracket cups feature tool fittings that allow mere millimeters of engagement, which can be a problem when attempting removal or installation. Solution: the Park Tool Bottom Bracket Tool Retaining System. Used in conjunction with nearly any Park Tool bottom bracket tool, the BBT-RS uses a spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. The BBT-RS can be configured for use with the vast majority of threaded and thread-together bottom bracket standards. The BBT-RS features an M8 threaded rod and a double-sided adapter nut with M12 and M15 threads, allowing it to thread directly into any compatible cartridge bottom bracket. The M15 adapter can also be used to install any of Park Tool's nine aluminum bottom bracket tools, all of which feature integrated threading for use with the BBT-RS. - Washer diameter: 57 mm (2.25") - Rod length: 175 mm (6.9") - Rod threading: M8 x 1.0 - Adapter nut threading: M12 x 1.0 & M15 x 1.0 Compatible with the following bottom bracket styles: - Threaded cup - Thread-together - Cartridge - Cup-and-cone Compatible with the following bottom bracket tools: - The following Park Tool socket-style aluminum bottom bracket tools: - BBT-27.3 - BBT-35-12 - BBT-35-36 - BBT-47-12 - BBT-47-16 - BBT-49.3 - BBT-59.3 - BBT-69.3 - BBT-79.3 - Wrench-style bottom bracket tools with a handle (e.g. Park Tool BBT-9, BBT-29, HCW-4) - Bottom bracket tools with external wrench flats (e.g. Park Tool BBT-19.2, BBT-22)

Muc-Off Waterless Wash is a highly advanced, easy to use spray which cleans and polishes in seconds without the need for water. It details your whole bike, motorcycle or car in seconds leaving behind a streak free shine. Its innovative formula is designed to encapsulate any surface dirt to prevent scratching. Use it to remove light contaminants in between major washes. - Cleans and polishes in one application - No need for water - No residual dust or streaks - Powder-free - Great for eBikes - no danger of getting electrical contacts wet

- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Trigger spray included for easy application on cassettes, chainrings and derailleurs - Safe for metal, plastic, rubber and seals

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

• Essential mechanic tool to properly service and maintain all RockShox products • For RockShox Monarch

Wheels Manufacturing Sealed Bearing Extractor - 12mm Fits the following bearings: - 6001 - 6801 - 6901

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

The Cyclone Chain Scrubber brushes are replaceable. The RBS-5 brush set includes the large side scrubbing brush, two roller brushes, and two wicking foam blocks.

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

Now you can easily tackle any crank bolt with Park's Crank Wrench. It features a dual-sided head with a 14mm socket and 8mm Allen wrench on a long, vinyl-coated handle so you're sure to have the leverage necessary for the job.

Jagwire's Pro Hydraulic Brake Line Cutter is a shop-quality tool that makes it quick and easy to precisely and cleanly cut hydraulic brake lines. With this fine hand-held tool you can cut brake lines on the workbench and on your bike, too.

Precision brake bleeding tools and adaptor kits for Magura brake systems. - Bleed adaptors fit MT series - Attaches to caliper only

Disc brake rotors should be regularly checked for wear to ensure safety and performance. The DCA-1 installs onto most digital, dial, or vernier calipers (including the Park Tool DC-1) and features protruding contact points that allow measurement of the center of the braking surface, bypassing the unworn edge to ensure an accurate measurement. The conical end points of the DCA-1 can be used to measure center-to-center distances of bolt holes for calculating bolt circle diameter (BCD) of chainrings and cranks. - Compatible with most standard vernier, dial, and digital caliper designs

Portable bicycle pressure washer with three lances, custom waterproof bag, cleaning solution, Bike Protect, Drivetrain Cleaner and C3 Ceramic Lube. Water supply is required. - Includes 3 lances; 1 for bicycles, 1 for motorcycles (higher- pressure), 1 bespoke (adjustable higher presser) for heavy grime, custom waterproof dry bag carry case - Also includes snow foam lance for Muc-Off Nano Tech Bike Cleaner creating a thick snow foam for deep cleaning - Weight: 15lbs - Intended for use with cold water only

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Wheels Mfg™ Thread Together & FSA® MegaEvo®. Manufactured in-house by Park Tool, anodized for easy identification, and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 16-notch bottom bracket tool fittings with a major diameter of 48–50 mm and a minor diameter of 46.4 mm, including: - FSA® MegaEvo® - Wheels Mfg™ Thread Together Note: Does not fit Hope™ BSA30

Take the mess out of tubeless tire setup and removal. The TSI-1 enables you to inject the perfect amount of sealant directly into mounted tubeless tires through the valve stem without removing the bead from the rim. The long, thin tube is able to fit all the way through many Presta stems with removable valve cores, for tidy injection and removal of all injectable tubeless bicycle tire sealants. Features an oversized syringe body with easy-to-read gauge for precise application of sealant. - Syringe capacity: 3.5 fl. oz. (100 cc) - Tube dimensions: 120mm (4.75"") long x 3.5mm (0.14"") diameter NOTE: some tubeless valve stems feature an opening that is smaller than the tube of the TSI-1. In these cases, the bead must be removed from the rim in order to remove sealant from the tire.

- Pad/rotor alignment tool, helps set up pad gap on all Hayes brakes

The Sport Mechanic Bike Repair Stand prioritizes the most critical aspects of the entire Feedback Sports bike repair stand lineup – compatibility, stability, durability and portability. The 360-degree rotating clamp uses a spinner knob closure that can accommodate up to 1.9? (4.8cm) and support 65lbs (29.5kg). Plus, the Sport Mechanic leverages the same 54? (137cm) wide base, with rubber-coated end caps, for amazing stability on any surface. And when the service day is done, it folds in to a compact unit for storage or travel. Add an available Travel Bag and a Tool Tray for the optimal bike maintenance setup.

Having the right tool for the job is essential when working on modern bicycles. Pedro's Universal Crank Remover provides the tools required to properly remove press fit square taper and splined cranks. Unlike similar items offered by the competition, Pedro's includes everything you need in one convenient package The Universal Crank Remover fits all cranks using 22mmx1 threads and square, tapered bottom bracket spindles and splined Shimano Octalink and ISIS Drive bottom bracket spindles that do not use a “self extracting” system.

Combining style, technology and ultimate value, the Rap II series bike multi tools provide unmatched performance at their price points. Engineered and manufactured in-house, these multi tools feature a number of innovative features. The ergonomic side-plates are machined from lightweight aluminum, anodized black, and offer a custom magnetic holder for an emergency quick-link. The steel tool bits are now longer and introduce our Black Anti-Corrosion technology, which provides superior corrosion resistance. Each configuration features up-to-date options for all modern bicycles; including gravel bikes, mountain bikes, e-bikes, and road bikes. Compact and versatile, these mini tools are built to last and designed to efficiently get riders back on the road or trail. - Ergonomic forged aluminum side plates with link storage - Enhanced anti-corrosion black CRV bits wrapped - Chrome vanadium steel fastening hardware - Weight: 148g Tool bits: - Quick link holder - Hex 2/2.5/3/4/5/6/8mm - Torx T10/T25 - Phillips - Chain breaker - 8/10mm wrench - 4 spoke wrenches - Disc brake wedge - Rotor truing tool

Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6000 - 6200 - 6800 - 6900

Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.