Packs/Racks/Baskets

The EXP Series Cholla Half-Frame Bag keeps ride needs easy to reach, but doesn’t block bottles. Six sizes help maximize space (and aesthetics) on a wide range of Salsa frames — and other bikes, too. And forget about strap rub with direct-mount capability on compatible Salsa frames. The Bluesign-approved Cordura nylon and molded-tooth zippers will stand up to dusty trails and daily use. Load up this half-frame bag and go find your next Adventure by Bike. - Direct-mount capable with a wide range of Salsa Bikes - Compatible with all Salsa and non-Salsa bikes with included One-Wrap straps - Inclusive fit with six sizes - bluesign®?-approved 1000D Cordura nylon body - bluesign®?-approved 400D nylon lining - Durable molded-tooth zippers - Cut-and-sew construction - Drive-side access, non-drive-side slash pocket - Fitment designed for two bottles

Pico, Medio and Gordo are our water, resistant extra durable range of Arundel seat bags. We make use of sonic welded seams and nylon fabric impregnated with thermoplastic polyurethane. Think frogman raft. The straps are also nylon and wider than usual, like seat belts in planes and cars. A wider strap means more Velcro area for better security. The materials we used cost more but in exchange, you have a seat bag that should last a good long time. All three are slightly roomier than our time proven corresponding sized Uno, Dual and Tubi. Gordo - 43 cubic in, 7 3/4 X 4 X 1 1/2 in - Sonic welded seams - Wide 1 1/2 in nylon strap with extra Velcro - Fits two Whataburger Juniors or a good amount of bike related gear

A sturdy handlebar-mounted metal basket for shopping trips, quick jaunts around town. New QuickClick Handlebar Mount (Fixer 3e) allows installation on eBikes to make attachment and removal a breeze. - Capacity: 16L/975 Ci - Weight: 1370G/3.02 Lb - Size: 35x26x25cm/13.8”x10.2”x9.8” - Attachment: QuickClick Handlebar Mount (Fixer 3e) Fits 25.4mm and 31.8mm handlebars (shims included)

The Drafter 10L Women's Backpack meets all your mountain bike backpack needs, combining all the best technical bike pack features in a low-profile, women's-specific silhouette. Stay hydrated on the move with the 3-liter Hydrapak reservoir, located on the lumbar for a low center of gravity, with a high-flow bite valve. Stay cool and comfortable thanks to the shorter torso length, Air Suspension back panel, and S-shaped breathable shoulder straps. The organizer pocket features a home for all your tools, replacement parts, and necessities. Additional features include spine protection compatibility, external helmet carry, and deployable armor carry straps. - Women's-specific fit - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - High-flow Blaster bite valve w/shut-off and magnetic hose clip - AirLite Suspension back panel - Breathable ergonomic shoulder straps w/sunglasses quick stash - Separate cargo and hydration compartments - Internal ebike spare battery storage system - Padded, fleece sunglasses/phone pocket - Internal organizer pockets - Deployable external carry straps - Front quick stash & compression panel - Reflective panel and safety light attach - DK Impact Spine protector compatible (not included)

The EXP Series Frame pack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. This frame pack is designed to fit the Cutthroat frame perfectly. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - D-ring to keep water bladder from compressing itself in the bottom of the bag - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - 500D Nylon with TPU lamination and PU coating, 1000D Polyester with dual sided TPU lamination, #10 waterproof YKK Zippers, Duraflex Hardware - XL Weight: 360g; Volume: 6.1L - L Weight: 320g; Volume: 5.2L - M Weight: 300g; Volume: 4.5L - S Weight: 260g; Volume: 3.5L

NEW: MOUNT NOT INCLUDED From January onward you must choose the handlebar mount that is right for your bike. Made of durable and waterproof polyester fabric, the ORTLIEB Ultimate Six Classic is a compact handlebar bag that plays a key role in the gear management plan of all bike touring enthusiasts. Depending on the model, the Ultimate Six Classic offers a 5.7 or 8.5-liter payload and ample space for your valuables and the things you want to have at the ready on your tour. The transparent and rainproof flap compartment that comes with the five-liter model offers 21 x 12 cm interior space for the convenient storage of smartphones, GPS devices and maps. And you can naturally operate your touchscreen device through the transparent cover. The two larger models enable the use of different inserts in case you want to securely stow any special gear such as your high-performance camera while you're underway. All of the handlebar bags come with a detachable shoulder strap, a reflector, and a zippered inside pocket. All Ultimate Six models are compatible with all ORTLIEB mounting sets, as well as Rixen & Kaul Klickfix mounting systems. An extensive range of accessories is also available for all of our handlebar bags. - Reflector made of high luminosity 3M Scotchlite material on front of bag - Small reflector made of black reflective film on base of the mounting unit - Maximum payload: 5 kg - Accommodates the attachment of a map case and Safe-it in sizes S to XL (all models from 2017) - Zippered inside pocket with carabiner for keychains

- Reflective logo on the back and both sides - Made of environmentally PVC-free material - 2 side compartments - Volume: 1L

Braving the elements? Pack your gear into our Minicave Drybag to keep things dry in The Great Nearby. Compatible with our Minicave Pannier, this bag is a triple threat when it comes to rain thanks to the waterproof nylon material, a roll-top closure, and taped seams. A valve at the top lets you load it down, close it up, and then release excess air to compress contents for easy packing. - Lightweight, waterproof fabric - Compatible with the Specialized/Fjällräven Microcave pannier - Roll-top closure and taped seams keep water out - Air-release valve for easy compression - Dimensions: Height: 28 cm, Width: 26 cm, Depth: 14 cm - Volume- approx. 8L - Material- Recycled 210D nylon with 10.000 mm PU coating

Turn almost any bike into a cargo hauling machine with our popular Eco Rack. Its classic good looks and ease of installation make this rack a great choice for carrying more and going farther.

The BiKASE Big Momma Rack with MIK mounting offers simple and secure storage that is easy on and easy off your bike rack.  Multiple pockets to keep you items organized with reflective materials to help you be seen at night with included rain cover to keep your items safe.  Sealed inner liner can also make a cooler for your lunch picnics! - MIK Mounting bracket attached. - Dimensions 12" x 5.5" x 7"

The Big Momma Bike Bag is a durable trunk bag with plenty of space! This is a medium rear rack bag from BiKASE that's universal and durable. The Big Momma trunk bag has plenty of space for your belongings. This is a slightly smaller version of the Big Daddy. - Top mesh pocket - Side zipper pockets - Side and rear reflective accents - Handle for easy carry - Front and bottom straps to attach the rack Specs - 600 denier polyester - Dimensions: 12 x 7 x 7.5 in. - Volume: 550 cu.in.

Our bestselling M.U.L.E. hydration pack has been part of your dependable support crew for years, but it was time for a tune-up. Enter the M.U.L.E. Pro 14. The same great pack you know and trust with the all-new Air Support Back Panel, plus a few essential additions to take your ride to the next level. Designed with body mapping technology to address areas that retain the most heat, maximum air flows across the back panel to provide comfortable cooling. A lightweight and breathable 3D vent mesh harness helps to keep your load light. A large capacity 3-liter Crux Reservoir, hip belt with cargo carry, and bike tool organizer makes it easy to plan for a full day's ride. Upgrade to max performance—this pack is also Impact Protector ready and e-bike battery compatible so you can go all out. - Air Support Pro Back Panel: Designed with body mapping technology to identify and ventilate the areas of the body that generate the most heat. Lightweight and breathable high pile mesh construction. - 3D Vent Mesh Harness: Lightweight and breathable with added cargo. Designed for all-day comfort. - Hip Belt With Cargo: Added stability and quick access to essentials - Helmet Carry: Stow and secure helmet - Integrated Tool Roll: Keep your CO2 cartridges, multi-tool, and tire levers safe and secure - Adjustable Sternum Strap: Offers a range of adjustments for a custom fit and increased stability - Impact Protection Ready: Compatible with the CamelBak Impact Protector (sold separately) - E-Bike Battery Sleeve: Securely and safely ride with a second e-bike battery for all-day adventures - Stretch Overflow Pocket: Quickly stash or shed an extra layer - Cargo Compression: Cinch down jackets or other items to keep the footprint small - Soft Lined Pocket: Keep your glasses or goggles safe and scratch-free - Magnetic Tube Trap Management: Keeps your tube secure and accessible when you need it - Reflectivity: For low-light safety - Light Loop: Clip on a light to make the ride to and from the trailhead safe - Armor Carry: Stow and secure knee and elbow pads on the climbs

- Lightweight, semi-rigid, top-tube-mounted, large smart phone holder - Rivet system to bolt onto frames with removable straps - Molded EVA foam structure with woven nylon cover - Compact design with extra-wide clamshell opening - Mesh divider keeps additional items in place - Clear, touchscreen-compatible cover - Three Velcro strap design attaches securely to the top tube - Easy access nutrition bag - Size: 19cm x 10cm x 7cm - Capacity: 0.5L - Weight: 98g

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

MTX QuickTrack® compatible TrunkBag featuring a divided main compartment constructed with our unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and rear water bottle holder lets you carry more water on extended trips. - Compartment: 1 divided main, two side zippered, Multi-expanding top - Capacity: 8L - Max load: Limited to rack's maximum load rating - Material: 600 denier polyester - Insulation: Rigid EVA foam - Bag Attachment: MTX QuickTrack® 2.0 - Size: 35 x 21 x 19 cm - Weight: 849 g - Features: Water bottle holder, Shoulder strap, carrying handle, 3M™ reflective strip, Safety light clip, Reflective elastic cord, Mesh pocket

Lezyne takes seatpack storage to the next level with their M-Caddy. Inside, fitted neoprene compartments organize your gear for easy access, while a durable, water-resistant zipper guards against moisture. Plus, a bottom compartment with a Velcro closure securely stores your multi-tool away from your spare tube, eliminating the possibility of a premature puncture. The M-Caddy also boasts a reflective taillight loop for safety.

This front rack is specifically designed for Aventon's Aventure and Aventure 2 fat tire ebikes. Get additional cargo space with this wide front rack that can easily hold a small cooler with drinks or a small picnic setup. With simple installation, you can unlock new possibilities with more cargo space for your Aventure ebike. Features: - For Aventon Aventure and Aventure 2 Ebike - Load Capacity: 20lbs - Black Matte Finish or Green Finish

This seat pack with its convenient adapter system offers you an elegant means of stowing an additional amount of critical gear. The Saddle-Bag Two is a redesigned ORTLIEB classic, a seat pack that is so practical that it belongs on every bike tour! The 1.6-liter version (ideal for road bikes and mountain bikes) of the waterproof Saddle-Bag Two provides a secure place for a bike-repair kit, a smartphone, or other items. The 4.1-liter version offers almost as much storage space as a small backpack, making it an ideal supplementary pack when you have a lot to carry. Thanks to the pack's roll closure and side buckles, everything you stow remains snugly packed and easy to access. The Saddle-Bag Two attaches directly to your bike seat with an adjustable snap buckle. The intuitive adapter allows you to quickly attach the pack to or detach it from your bike. Moreover, the snap buckle is compatible with all previous Saddle-Bag Two models so that you could use it on different bikes. A Velcro strap that attaches to your seat stem provides additional stability, effectively preventing any unwanted shifting. Another advantage in the case of the large pack is that it doubles as a rear fender, keeping spray water off your back. Further Features: - PVC-free, polyurethane-coated nylon fabric - Ideal for use with mountain bikes, road bikes, and touring bikes - No protruding plastic parts on the inside - Adjustable attachment below your bike seat - Velcro strap compatible with seat-stem diameters of up to 34.9mm (e.g. the Birdy folding bicycle) - Scotchlite 3M reflector for added protection at night - Daisy chain for the optional attachment of a rear light

Compatible with Eco Rack - Extra long replacement stays for Eco rack - Length: 15.5"

Specialized's Sitero Wing is the best way to carry water and inflation tools without compromising aerodynamics. Designed specifically for the Specialized Sitero saddle (sold separately), this handy accessory can be used with or without a bottle cage and holds a mini road pump and two CO2 canisters.

Versatility and simplicity is the virtue of this design. The rack deck can adjust fore and aft, but also flip over to better fit different sized bikes. - No frame mounts required - Performs well with trunk bags - Light and reflector mounting loop - Fits seatposts 22-32mm in diameter - Aircraft-grade 6061 aluminum tubing - 22 lb/10 kg carrying capacity

Easy access to your essentials like ride food, sunscreen, or your smart phone/camera can make or break a ride. Blackburn has redesigned their Outpost Top Tube Bag to fit more bikes, better. Now featuring longer, removable straps and optional 63mm-spaced, M5 bolt holes, the Outpost TT Bag will fit any bike for any ride. - Spacious interior with adjustable organizer - Exterior mesh pocket for phone or camera - Zippered I.D. and cash pocket - Top tube straps adjust to mount quickly on almost any bike - 70D Nylon, 4mm ripstop with water resistant treatment and backing

Turns any bike rack into a MIK-compatible Quick Release system. Mount the Universal Carrier to your existing Bike Rack and enjoy the easy on and off yet secure connection. Adds MIK Compatibility to any bike rack. Securely attaches with 4 bolts and a metal bracket. Choose from Bikase Baskets and Bags and other manufacturers' products. Max Capacity 15 lbs.

These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).

The Big Daddy 2 bike rack bag by BiKASE comes with a large main compartment with a seam-sealed liner, making the internal bag waterproof and drop down panniers on each side, adding extra storage for when needed! The Big Daddy 2 bike rack bag fits on all standard size rear bicycle racks using 4 straps to keep the bag tight and secure! - RF seam sealed internal liner - waterproof zipper on main storage compartment - water bottle/drink holder that will fit multiple size bottles - bungee net on top for added storage - drop down expandable side panniers - shoulder strap included - reflective accents - designed to fit most racks - dimensions: 13" x 9" x 8" (with panniers) - 1400 cubic inches, includes panniers

Offering 16 liters of carrying capacity, the Local Grocery pannier neatly folds out of the way when not in use and is compatible with most rear racks. - Fits Most Rear Racks—The straightforward mounting hardware makes mounting the local grocery basket fast and simple to most rack designs. - Light Mount—This bag features an integrated rear light mount to help keep you extra visible while you are running errands. - Folds Flat—The Local Grocery Bag folds flat to stay out of your way when it is not in use. - Water Resistant Design—You know what's better than a soggy carton of eggs? Yep, one that's not soggy—and with water resistance, nothing has to be soggy. - Reflective Print—For better nighttime visibility and safety. - Lifetime warranty

The Toptube-Bag is a convenient accessory that allows you to quickly and easily access your snacks, smartphone, or other small items while cycling.The magnetic lid closure enables you to open and close the bag with one hand, so you can keep your focus on the road ahead. This bag features an innovative Tube-Lock system, which makes it easy to attach and remove from the bike. The system can be directly attached to threaded eyelets on the top tube or attached flexibly using rubberized straps if there are no threaded eyelets. The bag lid comes with a silicone holder that can accommodate various smartphone sizes, as well as an integrated cable outlet to charge your devices while riding. Inside the PU-coated bag made of robust nylon fabric, an inner mesh pocket makes it easy to organize your equipment. FURTHER PRACTICAL DETAILS - Also suitable for mounting on carbon frames - If the threaded eyelets are not in the right place, you can flexibly adjust the position of the Toptube-Bag with the optional Offset-Plate - Reinforced bag body

Similar to the original MATTONE, a high friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the MATTONE will remain 'high and tight' under your saddle until you need to access it... no swinging, swaying, or rattling... ever

Free Your Pockets Why carry your tools yourself? Strap them to your bike and forget about them until you actually need them. Enough room for a CO2 cartridge, a small selection of tools + tire levers, and a spare tube. - Stretch hook-and-loop strap adjustment - Ripstop nylon construction - Printed silicone grip - Tri-fold design - 3 inner pockets