Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.
Giant's Numen TL1 5 LED Taillight boasts 5 bright LEDs so you get noticed out on the road. If that wasn't enough, you have 4 modes: steady, flashing, patrol, and random modes for high visibility in traffic. And it runs for up to 180 hours. This great water-resistant light also sports 2 mounting options.
Planet Bike's Beamer 1 & Blinky 3 Light Set will keep you safe when it's dark. For excellent visibility the Beamer headlight provides a focused LED beam and the Blinky taillight boasts 3 red LEDs. There are also quick-release mounts for easy on/off.
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side
Planet Bike's Superflash/Blaze Combo Light Set is a commuter's dream that maximizes your visibility on dark, moonless nights. The Blaze boasts a Nichia half-watt white LED with a brilliant beam specifically designed not only to be seen, but also to let you see where you're going. The Super Flash aims 2 LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! They both feature flashing and steady modes, include batteries and deliver run times of up to 100 hours.
Planet Bike's Superflash USB uses super bright LED's for visibility up to 1 mile. The ultra-compact case is weatherproof, light and durable, and features a soft-touch power switch. A USB-rechargeable lithium ion battery provides up to 36 hours of run time.
The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable
Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility. - Stainless steel spring clip for secure mounting.
X8 Front Light: - High-quality PREMIUM design - AWARD-WINNING light distribution technology - Easy-to-use LCD DISPLAY shows various information to the user - Extensive side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 80 LUX - 6 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 3 hrs XBR Rear Light: - ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILITY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option -.20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs
The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable
Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs. - Includes rigid mount and fabric band for comfortable and secure hold. - Wraps around ankle to keep pant legs away from chainrings. - Increases visibility and versatility of Stix lights, both on an off the bike.
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
Light and Motion Seca Comp 2000, with a perfect combination of high power in a compact, two-battery integrated design, is able to achieve a powerful output without quickly fading. A penetrating LED array gives a powerful spot beam in conjunction with a diffused flood beam ideal for both road and trail use to provide an exceptional range of vision for rides. Amber sidelights and a daytime pulse mode ensure road visibility and a secondary button allows the side lighting to be turned off when on the trail. - 2000 Lumen output certified to the FL-1 Standard - Engineered with a 3 LED array using the highest level CREE LEDs - Sealed, waterproof design tested to 1 meter for all conditions reliability - Beam pattern was engineered to maximize visibility at high velocity with ample beam distance lead-time and the widest beam angle for the sharpest turns - Secondary Race Mode simplifies your settings to switch between high power with 2 hours run time and low power with 4 hours - Accurate battery status indication illuminates the power button with three different colors to clearly display remaining battery life with 4 levels - Run times: 1:30 – 9 hrs over 6 modes
The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
150 lumen headlight + amber side lights Great optics, abundant lumen output and amber side lights make Planet Bike's Blaze 150 SL a smart choice for the urban bike commuter. It features excellent run times from easily replaceable AA batteries and its 3 modes keep you seen both day and night. FL1 TESTED RUN-TIMES - 4.8 hrs (high – 150 lm), 11 hrs (low - 70 lm) and up to 62 hrs (Superflash - 150 lm) LIGHT PATTERNS - Cree XP-E2 LED provides high and low power beam along with Superflash patterns REPLACEABLE BATTERY - 2 AA batteries (included) SAFETY SIDE LIGHTING - Amber side lights provide 275° of visibility FL1 RATED WATER RESISTANCE - Water resistance rated to IPX6 standard SPECS - Cree XP-E2 LED provides high and low power beam along with Superflash mode - FL1 Tested - Run times: 5 hrs (high – 150 lm), 12 hrs (low - 70 lm) and up to 64 hrs (Superflash - 150 lm) - Amber side lights provide 275° of visibility - Highly visible, even in daylight - Water resistance rated to IPX6 standard - 2 AA batteries (included) - QuickTwist bracket mounts and adjusts easily - 120 grams
Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
The Hecto Drive 500XL is a compact, durable cycling light with a machined aluminum body with built-in cooling fins and cutouts for side visibility. Its single LED design provides an impressive maximum output of 500 lumens and eight output modes, including a Daytime Flash mode. Offering up to 20 hours of total runtime, charging is simple with an integrated cable-free USB stick, and the light straps securely to a variety of handlebar shapes and sizes. Specs - Max Lumens: 500 - Weight: 84g - Max Runtime: 20 hours - Recharge Time: 2:30 hours
Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!
The Blaze 600 SLX provides high lumen output, generous run times and 275° of visibility. The addition of amber side lights and Courtesy mode make it a bike path hero. - Cree XPL2 LED provides high, medium and low power beam along with Courtesy & Superflash modes - FL1 Tested – Run times: 1.8 hrs (high - 600 lm), 3.7 hrs (medium - 300 lm), 8 hrs (low - 150 lm), 20 hrs (Courtesy 150-250 lm) and up to 40 hrs (Superflash - 600 lm) - Amber side lights provide 275° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP66 standard - Sanyo 2600 mAh lithium ion battery charges in 5 hours with micro USB cable (included) - Smart Charging Technology with built in low battery indicator - Quick Twist mount adjusts or removes without tools - Includes Lockout mode - 145 grams
A bright and reliable urban bike light combo set. These lights provide cyclists with all the modes to stay bright as they pedal around town day or night. Beamer 80 specs: - High output surface mounted LED provides high power beam along with Courtesy and Superflash modes - FL1 run times: 6.5 hrs (steady – 80 lm), 24 hrs (Courtesy - 24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX5 standard - 2 AAA batteries (included) - A3 cam bracket mounts, adjusts or removes without tools - 63 grams Grateful Red specs: - PB 28 LED Power Array provide steady, Courtesy and Superflash modes - FL1 tested Run times: 26 hrs (steady – 13 lm), 45 hrs (Courtesy - 4-11 lm) and up to 150 hrs (Superflash - 13 lm) - Provide 160° of visibility - Highly visible, even in daylight - Water resistance rated to IPX3 standard - 2 AAA batteries (included) - Includes rear rack and seat post mounts plus rear clip for multiple mounting options - 85 grams
Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included
Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket
Lezyne's versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne Mini XL, Power XL, Super XL, Deca and Mega Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
Recon-E Light to Shimano motor unit connector cable.
To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h
$29.99 $40.00 25% Off
A true two-in-one, the Stix Switch comes at you with a ying/yang mindset, flipping between red or white modes depending on your ride needs. Simply press and hold the button and you can go from a bright red taillight to a simple white headlight in seconds. Increase visibility and flexibility with the Stix Switch. - Headlight or taillight—you decide. - Press-and-hold for two seconds to shift between white and red modes. - Three white modes including: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens). - Five red modes including: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - 2- to 20-hour runtime. - Fresnel lens for maximum visibility in all directions. - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed). - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately). - Red/Green battery charge level indicator. - Additional mounting options available separately.
$36.99 $50.00 26% Off
Our latest to-see-by headlight, the Flash 300 brings Flux-style beam control to a more budget-friendly pricepoint. The Flash headlight combines a clean, compact design with a simple-yet-elegant silicone strap that reminds us of a watchband design from our friends in Cupertino. With two different-sized straps included, you can dial in just the right amount of stretch to keep the Flash secure, while ensuring super fast install and removal. Now you see it, now you don't. Thanks to its 700mAh battery pack, the Flash 300 will deliver 300 lumens for 1.5 hours, all the way up to 75 lumens for 6 hours. In Flash mode, you get 150 lumens for 12 hours. - 700mAh rechargeable Li-ion battery pack is an economical choice that delivers real-world usable lumens and runtimes. Micro USB cable included. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - Flash mode: 150 lumens for 12:00 hours - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Single-LED oval beam pattern gives a perfect blend of spot and peripheral visibility. - Steady High mode: 300 lumens for 1:30 hours - Steady Low mode: 75 lumens for 6:00 hours - Steady Medium mode: 150 lumens for 3:00 hours
Looking for a bright, small set of lights you can mount almost anywhere? Planet Bike’s Spok Set is the logical choice. The translucent case offers 220 degrees of visibility. Steady and flashing modes give you up to 100 hours of run time. Rubber mounting straps allow for mounting on handlebars, helmets, and seat posts of all shapes and sizes. These lights are so small they almost disappear in a jersey pocket, so there's no reason not to throw them in before you take off on a warp-speed ride.
Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.
Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.
Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.
- Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs
- Double-lens technology provides HIGH-QUALITY precise light distribution - LED STRIP shows battery level - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - 30 LUX - 5 Modes - Run time on Eco = 24 hrs - Run time on High Steady = 4 hrs
The NiteRider Lumina 1000 Boost is the perfect light for mountain bikers, road riders, adventure riders, and urban commuters. The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility both day and night. Lumina Features - Lumen Output: 1000 - 6 Modes with Run Times: 1:00 – 26:00hrs - Charge Time: 2:30 / 5:00 hrs - Weight: 172g - Battery: Li-Ion - Low Battery Indicator - 1000 lumen front bike light with Boost Mode - Water / Dust Resistant IP64 Rated Run Times - Low—6:00h at 200 Lumens - Med—3:30h at 375 Lumens - High—1:30h at 750 Lumens - Boost—1:00h at 1000 Lumens - Pulse Flash—10:30h at 750 Lumens - Fast Flash—6:00h at 750 Lumens - Walk—26:00h at 50 Lumens Sabre 110 Features - Lumen Output: 110 - 6 Modes with Run Times: 1:45 – 17:00hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h
- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: red = lower than 25%, yellow = 50%-25%, green = fully charged - No tools bracket
Replacement lens for Flux Expert Headlight. - Includes clear lens and gasket.
Do you have more than one bike? Get the most out of your Specialized Flux Expert tail light (sold separately) by getting an additional seatpost mount for easy switching between your rides. - All the parts needed to mount a Flux Expert taillight to a second bike - Includes mounting bracket, three interchangeable rings to fit different seatpost sizes and a 2.5mm Allen key. - Interchangeable rings will fit 27.2mm, 30.9mm, and Venge Aero seatpost.
Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems. - Includes: helmet bracket, velcro strap, and foam pad.
These small, simple lights are essential for safety when riding between dusk & dawn—and they're water resistant for when you're racing against the weather. - Simple mode selection: on, off, flashing - Universal attachment (fits 20–40mm diameter tubes) - Output: 17 lumens - Run time: 50 hours (steady), 150 hours (flashing)
$2.99 $5.00 40% Off
Designed to accommodate the more aerodynamic profile of aero bars and seatposts, the Stix Aero Strap mount gives you the ability to attach a Specialized Stix for day or night riding. - Stix light mount with longer, flexible silicone strap to fit Shiv and Venge seatposts, plus Aerofly handlebars.
Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts
- ACCELERATION SENSOR - when speed is reduced by more than 1.6 m/s (5.76 km/hr or 3.58 mph) an additional LED is switched on - Light guide for INCREASED VISIBILTY AND SAFETY - Brake light is 3 TIMES BRIGHTER than normal output in Steady mode - ADDITIONAL OPTIC in front of LED at lower end of light guide - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Bracket with flexible mounting option - .20 LUX - 7 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 10 hrs
Vis Adventure's powerfully focused beam and compact size make for a versatile light that can be used for any outdoor sport. It is perfectly designed to run on your helmet, bars, or anywhere you can fit a GoPro mount. Designed to maximize output in a compact design, the Vis Trail features an optimized reflector to make the beam broader and smoother without hotspots. Paired with either a 2, 3, or 6-cell interchangeable external battery, the Vis Trail gives you the flexibility to achieve the runtime you desire for the right price. This light is built for long gravel races, steep snowy slopes, and any adventure you throw at it. Charger not included and must be purchased separately. Key Features - 800 lumen output certified to the FL-1 Standard - Highest rated CREE LED - Custom engineered LED optics create a smooth, even beam pattern - Waterproof design provides all-weather reliability (submersible up to 1 meter) - 50" cord provides plenty of length for any setup requirement - Illuminated power button with low-runtime indicator - Compatible with 2, 3, and 6 cell batteries - Multiple mount options available including GoPro adapter - Additional one-touch 'Race Mode' feature enables riders to conveniently toggle between high and medium output Tech Specs - Lumen Output: High (800), Medium (400), Low (200), Pulse (200) - Beam Angle: 20° (spot) - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter - Impact Resistance (FL-1): 1 meter - Thermal Management: Passive Cooling - Fast Charge: False - Product Dimensions: 2.5'' x 1.2'' x 1.2''
Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.
Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.
$44.99 $60.00 25% Off
Heading out after dark and need lights? Look no further than the Flash Pack. This combo kit includes the new Flash 300 headlight with our tried-and-true Flashback taillight. See where you are going, and be seen by motorists, all the while not breaking the bank. Whether you are an all-conditions commuter or a student riding across campus, the Flash Pack has got you covered. - Single-LED headlight oval beam pattern gives a perfect blend of spot and peripheral visibility. Single-LED taillight for rear visibility. - 700 + 200mAh rechargeable Li-ion batteries charge in 2:00 hours each with included micro USB cables. - Headlight installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - O-ring mount (extra o-ring included) fits all round seatposts. - IPX7 waterproof means these lights will be there when you need them, even in the hardest rain. - White Steady High mode: 300 lumens for 1:30 hours - White Steady Medium mode: 150 lumens for 3:00 hours - White Steady Low mode: 75 lumens for 6:00 hours - White Flash mode: 150 lumens for 12:00 hours - Red Steady mode: 10 lumens for 2:00 hours - Red Power Flash mode: 20 lumens for 4:00 hours - Red Disco Flash mode: 14 lumens for 6:00 hours - Red Eco Flash mode: 5 lumens for 20:00 hours
The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact headlight. Sporting features like an easy on and off handlebar strap mount, low battery indicator, and easy USB rechargeability, it's the perfect light of choice for commuters and cycling enthusiasts. The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility both day and night. Swift Features - Lumen Output: 500 - 5 Modes with Run Times: 1:40 – 32:00hrs - Charge Time: 1:45 / 3:00hrs - Weight: 82g - Battery: Li-Po - Low Battery Indicator - 500 lumen super compact and bright taillight - Water / Dust Resistant IP64 Rated Swift Run Times - Low—10:00h at 150 Lumens - Med—3:40h at 250 Lumens - High—1:40h at 500 Lumens - Flash—12:30h at 500 Lumens - Walk—32:00h at 30 Lumens Sabre Features - Lumen Output: 110 - 6 Modes with Run Times: 1:30 – 10:30hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight Sabre Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h
Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.
A universal quick release mount that attaches to round-shaped drop and flat handlebars.
- Front Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse and Economic Flash. - Rear Modes include High Flash, Low Steady, DayTime PULSE, NightTime Pulse and Economic Flash. - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 20 hours for front and 10 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts
NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
- Front Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Low Steady, DayTime PULSE, NightTime Pulse and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 20 hours for front and 10 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts
- Front Modes include High Steady, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 26 hours for front and 11.25 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged
High-efficiency charger cable for Flux headlights. - High capacity wire can transfer more power with less loss. - Custom "L" shaped Mini USB Male for the best fit to Flux headlights. - NOTE: This is a CHARGE ONLY cable and cannot be used for data transfer.
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
This is the “Next Generation” of our compact and versatile fast-mounting bike lights. Their mission: to help cyclists boldly go where no cyclist has gone before. - High output surface mounted LED provides steady, Courtesy, and Superflash modes - FL1 tested run time: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy™ 1.5-4.5 lm) and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust & water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams
Page 1 of 3 Next page