Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cranksets

Campagnolo H11 Crankset
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
Quarq DZero Aluminum Power Meter Chassis BB30
When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DZero measures power in the heart of the bicycle — the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero represents the state-of-the-art in power meter technology As Quarq’s next generation of power meters, the DZero combines 10 years of technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app. - 10K temperature compensation: Eliminates variables caused by heat and cold to provide an unwavering record of your performance through all conditions - Built to last: Features an IPX7 waterproof rating - Bluetooth low energy technology and ANT+ wireless data transfer - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy within 1.5% - Bottom Bracket Compatibility: BB30 - Forged aluminum models do not work with BBright or BB386EVO bottom brackets
Quarq DZero Carbon Power Meter Crankset
When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DZero measures power in the heart of the bicycle—the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero represents the state of the art in power meter technology As Quarq’s next generation of power meters, the DZero combines 10 years of technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app and, for the carbon version, compatibility with BB386EVO bottom brackets. - 10K temperature compensation: Eliminates variables caused by heat and cold to provide an unwavering record of your performance through all conditions - Built to last: Features an IPX7 waterproof rating - Material: CNC Machined Aluminum Spider, Exogram Carbon Crank Arms - Accuracy: 1.5% - Bolt Circle Diameter: 130 BCD, 110 BCD - Q-Factor: 145mm - Wireless Technology: ANT+, Bluetooth low energy technology - Battery: CR2032, 200 hours of riding time - Weight: 578/559 grams (130/110 BCD) - Head Unit Compability: ANT+ and Bluetooth low energy technology compatible head units (available separately) - Compatibility: Traditional 5 bolt chainrings from most manufacturers. Hidden (HB) and Non-hidden Bolt (NHB) patterns. 10-speed, 11-speed, 1X and 2X. *Not compatible with Campagnolo chainrings
Race Face Alloy Crank Spindle Spacer
$2.99
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$4.50
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Race Face M12 bolt for Respond, Chester and Ride DH
$4.55
Race Face 12mm crank bolt/puller for Respond, Chester, and Ride DH cranksets.
Wheels Manufacturing Inc. 30mm ID Crank Spindle Spacer
$4.75 - $6.50
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
Race Face Chainring Bolt Pack Set of 4 12.5mm Bolt/Nut
$4.99
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
Race Face X-Type Spindle Spacer Kit XC/AM Cranks
$4.99
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
Race Face X-Type Spindle Spacer Kit FR/DH Cranks
$5.99
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
Problem Solvers Hex Crank Arm Fixing Bolt/Cap
$7.99
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
Race Face 2008+ Next SL and 2012+ Atlas Crank Bolt/Puller
$8.99
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
Race Face Cinch Direct Mount Lockring
$8.99
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool
Race Face Turbine/Next XC/SixC and 2008+ Deus Crank Bolt/Puller
$8.99
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
e*thirteen by The Hive ISCG Mounting Bolt Kit
$9.95
- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications
Race Face Alloy Crank Boot
$9.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Race Face Carbon Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
Race Face Next SL G4 Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Wheels Manufacturing Inc. Crank Spindle Spacer
$10.75
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
SRAM Carbon Crank Arm Boot
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
Wheels Manufacturing Inc. 29mm ID x 1mm Crank Spindle Spacer, Bag of 10
$11.25
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 1.0mm thick - 10 spacers per bag - Machined engineering-grade Delrin
Race Face Crank Arm Outer Tab Spacers (Set of 4)
$11.99
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
e*thirteen by The Hive Chain Guide Idler Pulley
$12.95
- Service parts for E-13 chainguides - Fits: 06+ single ring guides
e*thirteen by The Hive Chain Guide Lower Slider Kit
$12.95
- Lower slider replacement parts for E-13 chainguides
FSA BB30 Crank Bolts
$13.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
e*thirteen by The Hive Spider Lockring
$14.95
- Stainless steel chiainring/spider lockring for all e*thirteen cranks that use the Quick Connect Direct Mount System - Requires e*thirteen spider lockring tool. Use QBP part # TL0212
SR Suntour XCT Left Crank Arm
$15.00
SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.
Wheels Manufacturing Inc. 29mm ID x 0.5mm Crank Spindle Spacer, Bag of 10
$15.00
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. for use with SRAM DUB cranks - 10 spacers per bag - Machined engineering-grade Delrin
Easton Chainring Bolts
$16.99
- Chainring bolts for double cranks - Torx heads
absoluteBLACK Chainring Bolt Set - Long Bolts and Nuts Set of 4
$17.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4
Page 1 of 5 Next page